Curved Parts

Thomes Canada supplies curved furniture components.

All components are produced in Russia, to customer specifications.

Minimum Orders of 1500 pieces per profile.

Product properties

Curved parts for chair manufacturing are made from Birch veneer.

Depending on desired chair appearance, veneer grade may vary from C (upholstering quality) up to B (used for lacquering). Similar to the Plywood manufacturing process multiple plies of veneer are cross banded and glued together using interior type of glue with formaldehyde emission class E-1. Chair parts are molded using hot or high frequency press.

CP-0, Curved parts - Blanks

Prefabricated chair parts have straight trimmed edges. They are ready to be cut in the desired forms at your factory. The parts with the following dimensions are available:

Thickness - 10, 12 mm

	Metric, mm	Inches
Radius	914 559 x 559 559 x 509	36 22 x 22 22 x 20
Radius	305 483 x 483 495 x 483 483 x 610 483 x 635	12 19 x 19 19.5 x 19 19 x 24 19 x 25

CP-S, Curved parts - Seats


CP-S-01	CP-S_02	CP-S-03	CP-S-04	CP-S-05

CP-B, Curved parts - Backs


CP-B-01	CP-B_02	CP-B-03

CP-F, Curved parts - Frames


CP-F-01	CP-F_02	CP-F-03	CP-F-04	CP-F-05

CP-LA, Curved parts - Legs and Arms


CP-LA-01	CP-LA_02	CP-LA-03

CP-BS, Curved parts - Bed Slats

Bed slats are made by gluing together multiple plies of birch veneer using hot press and interior type of glue. All plies have equal long grain direction. This type of construction provides very long lasting and hard spring features of bed slats.

We offer bed slats in the following sizes

Radius, mm	Length, mm	Width, mm	Thickness, mm
3500	480 - 990	35 - 98	8, 11, 12
4000	400 - 910	38 - 170	8
8000	1100 - 1540	38 - 170	10, 12
9000	1190 - 1370	35 - 98	8, 11, 12

Tolerance: Length: +/- 1 mm, Width: +/- 0.5 mm, Thickness: +/-0.5 mm

Sizes, radius and other features are subject to mill confirmation.

Veneer is selected as follows:

Face veneer B-grade (small sound knots are acceptable with diameter up to 10 mm)
Underface plies CP-grade
Core plies C-grade
Moisture content 6-10%

Finishing:

Unfinished (sanded by sand paper, grit 180)
Urea glue coated (appearance similar to lacquered)